Technology and Services

How does PWHT help reduce residual stress and prevent weld cracking?

2026-05-27

How does PWHT help reduce residual stress and prevent weld cracking?

The Role of Post-Weld Heat Treatment in Heavy Industrial Steel Structures

In the field of heavy industrial steel structure fabrication, such as hydropower, oil and gas, pressure vessels, piping, or hydrogen plants, weld quality is a direct determinant of equipment safety and lifespan. Especially for structures using thick steel from 40mm to over 100mm, the welding process can generate significant residual stress and the risk of weld cracking if not properly controlled.
One of the most important solutions today is PWHT – Post Weld Heat Treatment. This technology is widely applied in heavy fabrication to reduce residual stress, stabilize the metal microstructure, and enhance the durability of steel structures.

What is Post-Weld Residual Stress?

During the welding process, the weld area is heated to a very high temperature and then cools rapidly. However, the rates of thermal expansion and contraction vary unevenly between different material zones, especially in thick steel structures. As a result, "residual stress" (Residual Stress) appears within the material – a type of stress that exists even when the structure is not under load.
These stresses typically concentrate in: the weld zone, the Heat Affected Zone (HAZ), and intersection points of steel structures 
Prolonged residual stress can cause: structural deformation, reduced load-bearing capacity, weld cracking during operation, and decreased equipment lifespan 
Especially in high-pressure equipment such as hydropower penstocks, pressure piping, or oil storage tanks, controlling residual stress is a mandatory technical requirement.

Why do Thick Steel Structures Require PWHT?

Thick steel structures always face more challenges during welding compared to thin materials.
The reasons are:
 thick steel has high heat retention capacity 
 the temperature difference between the surface and the core of the material is very high 
 uneven cooling rates 
 the heat-affected zone (HAZ) is prone to increased hardness 
As material thickness increases, the risk of defects such as: cold cracking, delayed cracking, hydrogen-induced cracking, and significant structural deformation also increases considerably.
For heavy fabrication projects using steel up to 100mm thick, such as:
 penstock fabrication for hydropower 
 pressure vessels 
 oil and gas structures 
 hydrogen modules 
 industrial tanks and vessels 
PWHT is almost an indispensable step to ensure long-term stability and operational safety.

How Does PWHT Reduce Residual Stress?

PWHT (Post Weld Heat Treatment) is a heat treatment process performed after welding is completed.
During this process, the entire structure or a part of it will be: heated to a specified temperature, held at temperature for a standard duration, and cooled under controlled conditions 
The main objective of PWHT is to reduce residual stress generated after welding.
Through controlled heating, the metal structure will be "relaxed," which helps to:
 reduce concentrated tensile stress 
 stabilize the metal microstructure 
 improve ductility 
 reduce HAZ hardness 
This helps the steel structure achieve a more stable state before being put into operation.

How Does PWHT Prevent Weld Cracking?

One of the most important roles of post-weld heat treatment is to mitigate the risk of weld cracking.
When PWHT is performed correctly, crack-inducing factors are significantly reduced:
 reduced residual stress 
 reduced stress concentration 
 facilitates hydrogen diffusion out of the metal 
 reduced hardness in the heat-affected zone 
This helps to prevent many dangerous types of defects such as:
 Hydrogen Cracking 
 Toe Crack 
 Root Crack 
 Delayed Crack 
This is why industries requiring high safety standards, such as hydropower, thermal power, oil and gas, chemical, and hydrogen energy, all mandate the application of PWHT for large pressure-bearing steel structures.

Lilama 10 is one of the structural fabrication enterprises in Vietnam that owns and operates a large-scale Post Weld Heat Treatment (PWHT) furnace, meeting stringent technical requirements in the hydropower, oil and gas, and energy sectors. The PWHT furnace system, with dimensions of 9,800 × 7,600 × 7,600 mm, allows for the treatment of pressure pipes (penstocks) over 7m long, suitable for large-scale heavy industrial projects. The entire heating, soaking, and cooling process is automatically controlled by a central monitoring system, ensuring precise control of temperature and treatment time according to international standards.

Company Information

LILAMA 10 Joint Stock Company

Main 3 Products

Construction Installation / Office Rental

LILAMA10 Joint Stock Company is a leading enterprise in manufacturing, installation, and technical services for civil, industrial, transportation, and infrastructure projects.To meet the demands and c ...

PICKUP

Technology & Services

CONTACT

Contact

This is the inquiry form for LILAMA 10 Joint Stock Company. Please enter your inquiry details.

This service is intended for consulting on processing projects and requesting quotes.
Please do not use it for company PR or sales activities.
If we receive complaints about the content sent, we may take measures such as forcibly suspending usage.

Name*Required
Company Name*Required
Department
Position
Email Address*Required
Phone Number*Required
Inquiry Type*Required
Inquiry Content*Required
Attach File

Only files with extensions of images (jpeg, jpg, gif, png, pdf) and compressed files (zip, lzh) are valid. Maximum file size 10MB