SERVICES
Technology & Services
SM-5 – Sintered wear-resistant material for small gears and precision mechanical parts
Peace-Lon's SM-5 is an iron-based sintered material for small module gears and precision mechanical structural parts. The material is equivalent to the old standard JIS SMF5030, and can be steam treated or carburized, quenched, and tempered depending on application requirements. Thanks to its good mechanical strength and heat treatability, SM-5 is suitable for components requiring enhanced surface hardness, wear resistance, and lifespan, while still leveraging the mass production advantages of powder metallurgy technology.
What is SM-5?
SM-5 is a sintered material used for mechanical structural parts, in which iron is the base component, combined with copper, nickel, and carbon. Metal powder is pressed into shape in a mold, then sintered to bond the material particles into a part with the required strength and precision. This production method allows for the creation of gears and many components with shapes close to the finished product, thereby reducing material waste and limiting some machining operations. SM-5 can be used in the as-sintered state or further surface-treated and heat-treated to adjust properties according to each application.
Key Features of SM-5
- Equivalent to old material JIS SMF5030
- Iron-based sintered material with added copper and nickel
- Can be carburized, quenched, and tempered
- Can be steam treated
- High tensile strength and yield strength
- Suitable for small module gears
- Can be used for various types of precision mechanical parts
- Favorable for mass production using powder metallurgy technology
SM-5 Material Composition
SM-5 uses iron as its main component, combined with copper and nickel to meet mechanical strength and heat treatability requirements.
| Component | Content |
| Fe | Remainder |
| Cu | Max 3% |
| Ni | 1–5% |
| C | Max 1% |
| Other components | Max 3% |
The combination of an iron base and alloying elements makes SM-5 suitable for parts requiring higher strength than conventional sintered materials, while also allowing for further heat treatment to improve surface properties.
SM-5 Mechanical Properties
| Property | Value |
| Density | From 6.5 g/cm³ |
| Hardness | From 120 HV |
| Tensile Strength | From 400 MPa |
| Yield Strength | From 300 MPa |
| Young's Modulus | 90 GPa |
| Elongation | From 1.0% |
| Impact Strength | From 10 J |
The above parameters indicate that SM-5 can meet the requirements for mechanical structural parts needing tensile strength, deformation resistance, and mechanical stability.(*) Actual values of the finished product may vary depending on sintering density, shape, size, heat treatment method, and production conditions.
Why is SM-5 suitable for small gears?
Small gears often have to transmit power in confined spaces. When tooth size decreases but load or transmission power increases, stress tends to concentrate at the tooth surface and root. This can lead to:
- Tooth surface wear
- Tooth deformation or chipping
- Increased vibration and noise
- Reduced meshing accuracy
- Shortened lifespan of the transmission mechanism
SM-5 has good mechanical strength and can be carburized and hardened, making it suitable for small gears requiring a combination of precision, wear resistance, and lifespan.
How does carburizing and hardening improve SM-5?
Carburizing and hardening is a method of introducing carbon into the surface layer of low-carbon iron-based materials, followed by quenching to create a hard surface layer. For gears manufactured from SM-5, this method can help:
- Increase tooth surface hardness
- Improve wear resistance
- Reduce damage from repeated contact
- Maintain necessary core strength
- Contribute to extending component lifespan
After quenching, the part is tempered to reduce stress from heat treatment and adjust mechanical properties.(*) The actual effectiveness regarding hardness and lifespan needs to be confirmed based on processing conditions and evaluation results for each product.
SM-5 can also be steam treated
In addition to carburizing, quenching, and tempering, SM-5 can also be steam treated. For iron-based sintered materials, steam treatment forms an oxide layer on the surface and within a portion of the porous structure. Depending on processing conditions, this method can help:
- Improve corrosion resistance
- Increase surface sealing
- Improve certain friction properties
- Limit liquid penetration through the porous system
The treatment method should be selected according to the intended use:
| Main Requirement | Possible Option |
| Enhance hardness and wear resistance | Carburizing, quenching, and tempering |
| Improve surface properties or corrosion resistance | Steam treatment |
| Simultaneous requirement for multiple properties | Individual assessment based on shape and usage conditions |
Typical Applications of SM-5
SM-5 is suitable for various types of gears and mechanical structural parts such as:
- Small module gears
- Gears for motors
- Gears and components for reduction gearboxes
- Gears used in office equipment
- Automotive components
- Precision machinery components
- Tubular parts
- Bushings and sintered structural parts
- Parts requiring heat treatment or wear resistance
Peace-Lon's High-Precision Gear Manufacturing Capability
In addition to selecting appropriate sintered materials, gear precision directly affects meshing capability, noise, and the lifespan of the transmission mechanism. Peace-Lon has experience manufacturing gears up to JGMA Class 2 precision, suitable for high-demand applications such as:
- Small motors
- Office equipment
- Precision machinery
- Reduction gearboxes
- Transmission mechanisms requiring low noise
Peace-Lon can provide comprehensive support from material selection, sintering production, heat treatment, precision machining, to inspection and quality assurance. If your business needs to enhance wear resistance, extend gear lifespan, or find a heat-treatable sintered material, Peace-Lon Vietnam can propose solutions based on the actual requirements of each product.
Company Information
Electronic parts
Oil-impregnated sintered bearing / Gears, pulleys, and other mechanical parts / Powder Metallurgy
Peace-Lon is a brand of Heiwa Sangyo Co., Ltd., a Japanese company that has manufactured self-lubricating oil-impregnated plain bearings and sintered mechanical parts utilizing powder metallurgy and s ...
CONTACT
Contact