SERVICES
Technology & Services
Special oil-impregnated plain bearing for use in both low and high temperature environments
Oil-impregnated plain bearings with self-lubricating properties are widely used in motors, industrial machinery, and various drive mechanisms. However, the lubrication performance and lifespan of bearings can vary significantly depending on the operating temperature. In high-temperature environments, lubricating oil is prone to oxidation, evaporation, and viscosity reduction. Conversely, in low-temperature environments, the viscosity of lubricating oil can increase, leading to higher rotational resistance and starting torque. Therefore, to ensure stable operation of oil-impregnated plain bearings, it is crucial to select an impregnating oil suitable for the actual operating temperature and conditions. At Peace-Lon, we offer special oil-impregnated plain bearings that are dedicated to low temperatures, dedicated to high temperatures, and also capable of handling a wide temperature range from low to high temperatures.
Are you experiencing bearing issues due to temperature?
The performance of oil-impregnated plain bearings is not solely determined by the bearing material. The characteristics of the lubricating oil impregnated into the pores of the material also significantly affect startability, rotational stability, wear, and product lifespan. Do you face any of the following challenges?
- Lubricating oil degrades quickly in high-temperature environments
- Plain bearings wear out due to insufficient lubrication
- Lubricating oil viscosity increases in low-temperature environments, leading to higher starting torque
- Equipment does not start or operate smoothly in cold regions
- Bearing performance cannot be stably maintained in environments with large temperature fluctuations
- Bearings that can be used from low to high temperatures are required
These issues can potentially be improved by selecting a lubricating oil suitable for the operating environment.
Reasons why oil-impregnated plain bearing performance changes with temperature
The characteristics of lubricating oil change with temperature. Using a lubricating oil that is not suitable for the operating conditions makes it difficult to maintain a stable oil film between the shaft and the bearing.
In high-temperature environments
In high-temperature environments, the following changes are prone to occur in lubricating oil:
- Oxidation and degradation
- Evaporation
- Viscosity reduction
- Decreased oil film stability
When lubrication performance deteriorates, the surfaces of the shaft and bearing are more likely to come into direct contact, increasing the risk of friction and wear.
In low-temperature environments
In low-temperature environments, the following problems may occur:
- Increased lubricating oil viscosity
- Increased resistance during startup
- Increased motor starting torque
- Poor spreading of oil to the sliding surfaces
- Difficulty in achieving sufficient lubrication performance at the start of operation
For this reason, when selecting impregnating oil for oil-impregnated plain bearings, the operating temperature is one of the important conditions.
Differences between high-temperature oil and low-temperature oil
The main differences are the viscosity characteristics and heat resistance of the lubricating oil.
| Operating Conditions | Main performance required for impregnating oil |
| High-temperature environment | Excellent heat resistance, suppressing oxidation, evaporation, and viscosity reduction |
| Low-temperature environment | Maintaining appropriate viscosity even at low temperatures, suppressing increases in rotational resistance and starting torque |
| Wide temperature range | Stably maintaining lubrication performance from low to high temperatures |
Lubricating oil should not be selected based solely on the maximum or minimum temperature. The entire temperature range to which the product is actually exposed, including storage, startup, and operation, must be evaluated.
Reasons for selecting lubricating oil according to actual operating conditions
Even for products used in the same temperature environment, the appropriate lubricating oil may differ if factors such as load, rotational speed, and ambient environment vary. When selecting special oil-impregnated plain bearings, Peace-Lon comprehensively checks the following conditions:
- Minimum and maximum operating temperatures
- Rotational speed
- Load
- Operating time
- Continuous or intermittent operation
- Frequency of starts and stops
- Operating environment such as dryness, humidity, and dust
- Requirements regarding starting torque
- Target lifespan
Based on these conditions, we propose a combination of bearing material and impregnating oil suitable for the application.
Solution: Special oil-impregnated plain bearings tailored to operating temperature
At Peace-Lon, we propose plain bearings impregnated with special oil, tailored to the operating environment of each product. Even in environments where general lubricating oils struggle, by appropriately combining the bearing material and impregnating oil, the following effects can be expected:
- Maintenance of lubrication performance
- Reduction of wear
- Extended lifespan of plain bearings
- Reduced starting resistance at low temperatures
- Maintenance of stable rotational performance
- Suppression of performance degradation in high-temperature environments
At Peace-Lon, in addition to lubricating oils dedicated to low temperatures or high temperatures, specifications capable of handling a wide temperature range from low to high temperatures can also be considered. Such bearing bushes are suitable for products with large seasonal temperature variations, equipment used in multiple climatic regions, and products exported to markets with different temperature conditions.
Features of special oil-impregnated plain bearings
- Impregnating oil can be selected according to the operating temperature
- Easy to maintain lubrication performance even in high-temperature environments
- Supports stable startup even in low-temperature environments
- Can accommodate a wide temperature range depending on operating conditions
- Contributes to wear reduction
- Contributes to extending the lifespan of plain bearings
- Specification proposals tailored to the operating conditions of each product are possible
Comparison with general oil-impregnated plain bearings
| Item | Peace-Lon Special Oil-Impregnated Plain Bearings | General Oil-Impregnated Plain Bearings |
| Adaptability to high-temperature environments | ◎ | △ |
| Adaptability to low-temperature environments | ◎ | △ |
| Adaptability to wide temperature ranges | ◎ | △ |
| Lubrication performance | ◎ | ○ |
| Extended lifespan | ◎ | ○ |
| Selection tailored to operating conditions | ◎ | △ |
※The optimal specifications and impregnating oil must be selected according to the actual operating conditions.
Applications of special oil-impregnated plain bearings
Plain bearings impregnated with special oil are suitable for various equipment used in low-temperature, high-temperature, or environments with large temperature fluctuations. Key applications include:
- EV/Automotive motors
- Industrial motors
- Food machinery
- Office automation equipment
- Medical devices
- Semiconductor manufacturing equipment
- Air conditioning systems
- Various conveying devices
- Outdoor equipment
- Equipment for cold regions
They are particularly suitable for products requiring long hours of continuous operation, equipment used outdoors, and products deployed in regions with different climatic conditions.
Frequently Asked Questions about Special Oil-Impregnated Plain Bearings
What is the maximum operating temperature?
The usable temperature range varies depending on the type of lubricating oil, bearing material, load, speed, and operating conditions. Therefore, a common temperature range cannot be set for all products. Peace-Lon will propose appropriate specifications after confirming the actual operating environment.
Can one bearing handle both low and high temperatures?
Depending on the operating temperature range and conditions, we can propose special oil-impregnated plain bearings that can be used across a wide range from low to high temperatures. However, load, rotational speed, starting torque, and operating time must also be evaluated in conjunction.
Is it possible to receive individual proposals tailored to specific operating conditions?
Yes, it is. At Peace-Lon, we propose combinations of bearing material, impregnating oil, and bearing specifications after confirming not only the operating temperature but also rotational speed, load, and operating environment.
Peace-Lon Vietnam Technical Support
Peace-Lon Vietnam provides comprehensive support, from the selection of oil-impregnated plain bearing materials to the selection of special impregnating oils tailored to the operating environment. When stable operation is required in high-temperature environments, cold regions, or conditions with large temperature fluctuations, special oil-impregnated plain bearings are a strong option. Peace-Lon Vietnam proposes the appropriate combination of bearing material and impregnating oil based on actual operating conditions.
Company Information
Electronic parts
Oil-impregnated sintered bearing / Gears, pulleys, and other mechanical parts / Powder Metallurgy
Peace-Lon is a brand of Heiwa Sangyo Co., Ltd., a Japanese company that has manufactured self-lubricating oil-impregnated plain bearings and sintered mechanical parts utilizing powder metallurgy and s ...
CONTACT
Contact