Technology & Services

SM-5 – Sintered wear-resistant material for small gears and precision mechanical parts

SM-5 – Sintered wear-resistant material for small gears and precision mechanical parts

Peace-Lon's SM-5 is an iron-based sintered material for small module gears and precision mechanical structural parts. The material is equivalent to the old standard JIS SMF5030, and can be steam treated or carburized, quenched, and tempered depending on application requirements. Thanks to its good mechanical strength and heat treatability, SM-5 is suitable for components requiring enhanced surface hardness, wear resistance, and lifespan, while still leveraging the mass production advantages of powder metallurgy technology.

What is SM-5?

SM-5 is a sintered material used for mechanical structural parts, in which iron is the base component, combined with copper, nickel, and carbon. Metal powder is pressed into shape in a mold, then sintered to bond the material particles into a part with the required strength and precision. This production method allows for the creation of gears and many components with shapes close to the finished product, thereby reducing material waste and limiting some machining operations. SM-5 can be used in the as-sintered state or further surface-treated and heat-treated to adjust properties according to each application.

Key Features of SM-5

  • Equivalent to old material JIS SMF5030
  • Iron-based sintered material with added copper and nickel
  • Can be carburized, quenched, and tempered
  • Can be steam treated
  • High tensile strength and yield strength
  • Suitable for small module gears
  • Can be used for various types of precision mechanical parts
  • Favorable for mass production using powder metallurgy technology

SM-5 Material Composition

SM-5 uses iron as its main component, combined with copper and nickel to meet mechanical strength and heat treatability requirements.

ComponentContent
FeRemainder
CuMax 3%
Ni1–5%
CMax 1%
Other componentsMax 3%

The combination of an iron base and alloying elements makes SM-5 suitable for parts requiring higher strength than conventional sintered materials, while also allowing for further heat treatment to improve surface properties.

SM-5 Mechanical Properties

PropertyValue
DensityFrom 6.5 g/cm³
HardnessFrom 120 HV
Tensile StrengthFrom 400 MPa
Yield StrengthFrom 300 MPa
Young's Modulus90 GPa
ElongationFrom 1.0%
Impact StrengthFrom 10 J

The above parameters indicate that SM-5 can meet the requirements for mechanical structural parts needing tensile strength, deformation resistance, and mechanical stability.(*) Actual values of the finished product may vary depending on sintering density, shape, size, heat treatment method, and production conditions.

Why is SM-5 suitable for small gears?

Small gears often have to transmit power in confined spaces. When tooth size decreases but load or transmission power increases, stress tends to concentrate at the tooth surface and root. This can lead to:

  • Tooth surface wear
  • Tooth deformation or chipping
  • Increased vibration and noise
  • Reduced meshing accuracy
  • Shortened lifespan of the transmission mechanism

SM-5 has good mechanical strength and can be carburized and hardened, making it suitable for small gears requiring a combination of precision, wear resistance, and lifespan.

How does carburizing and hardening improve SM-5?

Carburizing and hardening is a method of introducing carbon into the surface layer of low-carbon iron-based materials, followed by quenching to create a hard surface layer. For gears manufactured from SM-5, this method can help:

  • Increase tooth surface hardness
  • Improve wear resistance
  • Reduce damage from repeated contact
  • Maintain necessary core strength
  • Contribute to extending component lifespan

After quenching, the part is tempered to reduce stress from heat treatment and adjust mechanical properties.(*) The actual effectiveness regarding hardness and lifespan needs to be confirmed based on processing conditions and evaluation results for each product.

SM-5 can also be steam treated

In addition to carburizing, quenching, and tempering, SM-5 can also be steam treated. For iron-based sintered materials, steam treatment forms an oxide layer on the surface and within a portion of the porous structure. Depending on processing conditions, this method can help:

  • Improve corrosion resistance
  • Increase surface sealing
  • Improve certain friction properties
  • Limit liquid penetration through the porous system

The treatment method should be selected according to the intended use:

Main RequirementPossible Option
Enhance hardness and wear resistanceCarburizing, quenching, and tempering
Improve surface properties or corrosion resistanceSteam treatment
Simultaneous requirement for multiple propertiesIndividual assessment based on shape and usage conditions

Typical Applications of SM-5

SM-5 is suitable for various types of gears and mechanical structural parts such as:

  • Small module gears
  • Gears for motors
  • Gears and components for reduction gearboxes
  • Gears used in office equipment
  • Automotive components
  • Precision machinery components
  • Tubular parts
  • Bushings and sintered structural parts
  • Parts requiring heat treatment or wear resistance

Peace-Lon's High-Precision Gear Manufacturing Capability

In addition to selecting appropriate sintered materials, gear precision directly affects meshing capability, noise, and the lifespan of the transmission mechanism. Peace-Lon has experience manufacturing gears up to JGMA Class 2 precision, suitable for high-demand applications such as:

  • Small motors
  • Office equipment
  • Precision machinery
  • Reduction gearboxes
  • Transmission mechanisms requiring low noise

Peace-Lon can provide comprehensive support from material selection, sintering production, heat treatment, precision machining, to inspection and quality assurance. If your business needs to enhance wear resistance, extend gear lifespan, or find a heat-treatable sintered material, Peace-Lon Vietnam can propose solutions based on the actual requirements of each product.

Company Information

PEACE-LON VIETNAM COMPANY LIMITED

Industry Classification

Electronic parts

Main 3 Products

Oil-impregnated sintered bearing / Gears, pulleys, and other mechanical parts / Powder Metallurgy

Homepage URL

Display URL

Peace-Lon is a brand of Heiwa Sangyo Co., Ltd., a Japanese company that has manufactured self-lubricating oil-impregnated plain bearings and sintered mechanical parts utilizing powder metallurgy and s ...

PICKUP

Technology & Services

CONTACT

Contact

This is the inquiry form for PEACE-LON VIETNAM COMPANY LIMITED. Please enter your inquiry details.

This service is intended for consulting on processing projects and requesting quotes.
Please do not use it for company PR or sales activities.
If we receive complaints about the content sent, we may take measures such as forcibly suspending usage.

Name*Required
Company Name*Required
Department
Position
Email Address*Required
Phone Number*Required
Inquiry Type*Required
Inquiry Content*Required
Attach File

Only files with extensions of images (jpeg, jpg, gif, png, pdf) and compressed files (zip, lzh) are valid. Maximum file size 10MB