PEM - Self-Clinching Nuts (Types S, SS, CLS, CLSS)
Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet. A serrated clinching ring prevents the fastener from rotating after installation.
Provide load-bearing threads in thin sheets with high pushout and torque-out resistance.
Type CLA is recommended for use in steel or aluminum sheets HRB (Rockwell B scale) 50 or less and HB (Hardness Brinell) 82 or less.
Types CLS / CLSS are recommended for use in steel or aluminum sheets HRB (Rockwell B scale) 70 or less and HB (Hardness Brinell) 125 or less.
Types S / SS are recommended for use in steel or aluminum sheets HRB (Rockwell B scale) 80 or less and HB (Hardness Brinell) 150 or less.
Type SP is recommended for use in stainless steel sheets HRB (Rockwell B scale) 90 or less and HB (Hardness Brinell) 185 or less.
Eg: CLS-M3-2
Thread Size x Pitch: M3 x 0.5
Thread Code: M3
Shank Code:2
A (Shank) Max.:1.38 mm
Rec. Min. Sheet Thickness:1.4 mm
Hole Size in Sheet + 0.08: 4.22 mm
C Max.: 4.2 mm
E ± 0.25: 6.35 mm
T ± 0.25: 1.5 mm
Min. Dist. Hole C/L to Edge: 4.8 mm
For Use in Sheet Hardness: HRB 70 / HB 125 or Less
Thread Specification: Internal, ASME B1.13M, 6H
Fastener Material: 300 Series Stainless Steel
Standard Finish: Passivated and/or tested per ASTM A380
CONTACT
お問い合わせフォーム関連する生産財
-
【送電線および変電所の設置サービス】LILAMA 10 JOINT STOCK COMPANY
-
クーラント交換頻度激減!水性クーラント用浮上油除去装置「 ...SAITAMA ECO TECH VIETNAM CO., ...
-
【ベトナムで中小製造業の新規受注を後押し】ものづくり商談 ...株式会社NCネットワークベトナム
-
試作・マシニング加工(1)ナカセイキベトナム有限会社
-
優秀なベトナム人材をご紹介しますSEKISHO VIETNAM COMPANY LIMITE ...
-
ご要望に応じて工場で製造MINH QUANG INDUSTRIAL DEVELOPM ...