SERVICES
Technology & Services
Iron-copper based oil-impregnated bearing material "FCS-200A" contributing to cost reduction
Peace-Lon's FCS-200A is a general-purpose iron-copper based oil-impregnated bearing material that combines the mechanical strength of iron-based materials and the sliding performance of copper-based materials in a well-balanced manner.
It is suitable as a VA/VE proposal material for cases where you want to maintain the strength, load capacity, and sliding performance required for a product while keeping the cost of oil-impregnated bearings down.
What is FCS-200A?
FCS-200A is a sintered oil-impregnated bearing material primarily composed of iron, with copper appropriately blended.
Lubricating oil is impregnated into the fine pores formed within the material during the sintering process. During bearing operation, the internal oil is supplied to the sliding surfaces of the bearing and shaft, supporting friction reduction and stable sliding.
By combining iron and copper, the following performances are ensured in a well-balanced manner:
Material cost
Mechanical strength
Load capacity
Sliding performance
Durability in use
Features of FCS-200A
1. Excellent Cost Performance
Since FCS-200A is primarily composed of iron, it has the characteristic of being able to suppress material costs more easily compared to general copper-based oil-impregnated bearing materials.
It contributes not only to the cost of individual parts but also to the overall cost reduction of the product. Especially for mass-produced products, cost reduction per unit leads to significant VA/VE effects.
2. High Mechanical Strength
Leveraging the characteristics of iron-based materials, high mechanical strength and load capacity can be expected.
It is also suitable for oil-impregnated bearing applications requiring strength and rigidity.
3. Good Sliding Performance
By appropriately blending copper into the material, good sliding performance is ensured while maintaining the strength of iron-based materials.
This allows FCS-200A to be used in applications where both strength and sliding performance are required.
4. Material Suitable for VA/VE Activities
FCS-200A can be considered as a candidate material for the following challenges:
Want to review currently used bearing materials
Want to reduce copper usage
Want to reduce raw material costs
Want to stabilize procurement costs
Want to change materials while maintaining required performance
However, material replacement needs to be evaluated not only based on a simple comparison of material unit prices but also on actual operating conditions.
Comparison with General Copper-Based Materials
| Item | FCS-200A (Iron-Copper Based) | General Copper-Based Material |
|---|---|---|
| Cost | ◎ | △ |
| Mechanical Strength | ◎ | ○ |
| Sliding Performance | ○ | ◎ |
| Load Capacity | ◎ | ○ |
| VA/VE Effect | ◎ | △ |
※The above represents general characteristic trends. For actual material selection, factors such as load, rotational speed, dimensions, lubrication conditions, and operating environment must be considered.
Main Applications of FCS-200A
FCS-200A is used in a wide range of applications such as:
Small motors
Home appliances
Office automation equipment
Power tools
Industrial machinery
Various conveying equipment
Various rotating and sliding mechanisms using oil-impregnated bearings
It is particularly suitable for applications where a balance of cost, mechanical strength, load capacity, and sliding performance is required.
Can FCS-200A Replace Copper-Based Oil-Impregnated Bearing Materials?
FCS-200A can be considered as a replacement candidate for copper-based oil-impregnated bearing materials in many applications.
However, the feasibility of replacement varies depending on the following conditions:
Load on the bearing
Shaft rotational speed
Operating temperature
Dimensional accuracy
Shaft material and surface roughness
Characteristics of the impregnated oil
Noise reduction requirements
Required lifespan
Particularly in applications where quietness and conformability to the shaft are important, copper-based materials may be more suitable.
Therefore, for actual replacement, it is important to clarify the required performance and then conduct prototyping and evaluation.
Technical Support from Peace-Lon Vietnam
Peace-Lon Vietnam provides consistent support from the selection of oil-impregnated bearing materials to material replacement consideration, prototyping, evaluation, and mass production.
In VA/VE proposals, we do not simply switch to cheaper materials, but rather propose appropriate materials by considering the balance of cost, mechanical strength, sliding performance, load capacity, and operating conditions.
If you have any of the following challenges, please consult Peace-Lon Vietnam:
Want to reduce the cost of oil-impregnated bearings
Want to consider replacing copper-based materials
Want to stabilize raw material costs and procurement costs
Want to promote VA/VE activities
Want to select an oil-impregnated bearing material suitable for the application
Company Information
Electronic parts
Oil-impregnated sintered bearing / Gears, pulleys, and other mechanical parts / Powder Metallurgy
Peace-Lon is a brand of Heiwa Sangyo Co., Ltd., a Japanese company that has manufactured self-lubricating oil-impregnated plain bearings and sintered mechanical parts utilizing powder metallurgy and s ...
CONTACT
Contact