Technology & Services

Processing connector pins, wire harnesses, and complete component assembly - Prec Việt Nam

Processing connector pins, wire harnesses, and complete component assembly - Prec Việt Nam

PREC Vietnam – Machining Partner for Connection Components in Electrical and Electronic Equipment

In electrical, electronic, industrial equipment, motorcycles, automobiles, and control systems, the quality of electrical connections plays a very important role. A stable connection assembly does not only depend on the electrical wire or connector housing, but also directly on the small metal parts inside such as connector pins, contact pins, terminals, and electrical contacts.
These are small-sized components but require high precision. If a connector pin has incorrect dimensions, burrs, surface scratches, eccentricity, or is not suitable for the crimping process, the entire wire harness assembly may experience assembly errors or electrical contact failures.
PREC Vietnam focuses on this product group with capabilities ranging from automatic turning, CNC turning, precision grinding, wire harness processing to complete component assembly.

Precision Automatic Turning Capabilities for Small Components

PREC Vietnam specializes in automatic turning, CNC turning, and precision grinding for small components such as pins, shafts, and connector parts. The factory is equipped with automatic lathes from manufacturers such as CITIZEN, TSUGAMI, Nomura Seiki, suitable for mass production of parts like connector pins, contact pins, precision pins, straight pins, taper pins, and metal components used in wire harnesses.
Connector pins are responsible for transmitting signals or electrical current between the wire harness, connector, and device. Therefore, post-machining products require strict control over outer diameter, length, concentricity, straightness, roundness, surface quality, burrs, and cleanliness of holes/grooves.
In addition to the automatic turning system, PREC also has supporting equipment such as centerless grinders, surface grinders, Mitutoyo 3D measuring machines, ACCRETECH roughness testers, Nikon measuring microscopes, and specialized inspection equipment. This allows the company to better control critical requirements in small component machining: tight tolerances, lot-to-lot stability, minimal surface scratches/nicks, reduced burrs, and suitability for post-machining processes such as plating, terminal crimping, insertion into connector housings, and complete wire harness assembly.

Wire Harness Processing

A wire harness is a complete assembly of electrical wires, typically including electrical wires, terminals, connectors, contact pins, and related accessories. In electronic devices, industrial equipment, motorcycles, automobiles, or household appliances, wire harnesses help transmit power and signals between modules.
PREC Vietnam can support processes related to wire harness manufacturing, including:
  • Wire cutting to specified length;
  • Wire stripping;
  • Terminal/contact pin crimping;
  • Terminal insertion into connector housing;
  • Visual inspection;
  • Post-assembly connection status inspection.

Complete Component Assembly

Beyond metal component machining, PREC Vietnam also offers post-machining component assembly support. When connector pins and wire harnesses are coordinated within the same production process, customers can better control the manufacturing process. This helps reduce production errors, shorten coordination time, and enhance the stability of the complete product assembly.

Quality Control at Every Stage

For small products like connector pins and contact pins, even a minor deviation can directly affect assembly quality and signal transmission capability. Burrs at the pin tip or in small grooves can make insertion into the housing difficult. Unstable dimensions can prevent terminals from seating correctly. Scratched, nicked, or improperly treated contact surfaces can reduce the stability of the electrical connection point.
Therefore, PREC Vietnam emphasizes quality control throughout the production process, not just at the final stage. For automatic turned products, the company conducts periodic inspections **every 2 hours** to monitor dimensional stability during machine operation. For critical dimensions, PREC performs 100% inspection to ensure products meet technical requirements. In case an error is detected at an inspection point, PREC will trace back the corresponding production period and inspect all products machined within that timeframe.
This control method helps mitigate the risk of mass defects, while ensuring that products failing to meet dimensional, visual, burr, or surface quality standards are not passed on to subsequent processes such as plating, terminal crimping, housing assembly, or wire harness assembly.
Measurement equipment systems such as 3D measuring machines, roughness testers, measuring microscopes, and specialized inspection devices help PREC maintain stable quality in mass production, especially for small components requiring tight tolerances like connector pins, contact pins, and parts used in wire harnesses.

From Connector Pin to Complete Wire Harness

In modern manufacturing, customers are not just looking for a component machining supplier, but a partner who understands the entire relationship between components, wires, connectors, and assemblies. For connector pins, the post-machining product must be suitable for plating, wire crimping, housing insertion, and final inspection. For wire harnesses, the quality of the assembly depends on the wires, terminals, connectors, and the stability of each contact point.
PREC Vietnam can support customers in this regard: precision machining of connector pins, combined with wire harness manufacturing and complete component assembly. This is a suitable solution for businesses looking to optimize their supply chain, reduce assembly risks, and enhance product quality stability.

Company Information

Prec Co.,ltd

Main 3 Products

Precision parts cutting / Heat treatment operations / All operations related to the above

Prec Vietnam is a manufacturing company based in Vinh Phuc Province, Vietnam, operating in two key areas: precision machining and wire harness assembly. Originally specializes in lathe processing in J ...

PICKUP

Technology & Services

CONTACT

Contact

This is the inquiry form for Prec Co.,ltd. Please enter your inquiry details.

This service is intended for consulting on processing projects and requesting quotes.
Please do not use it for company PR or sales activities.
If we receive complaints about the content sent, we may take measures such as forcibly suspending usage.

Name*Required
Company Name*Required
Department
Position
Email Address*Required
Phone Number*Required
Inquiry Type*Required
Inquiry Content*Required
Attach File

Only files with extensions of images (jpeg, jpg, gif, png, pdf) and compressed files (zip, lzh) are valid. Maximum file size 10MB