LUBELAS

LUBELAS DRILUBE – Lubrication Film for Rubber Components is a flagship product in the rubber lubrication film / lubrication film for rubber category from DRILUBE VIETNAM. This is a line of functional coatings specifically developed for engineered rubber components, helping to improve sliding properties, reduce friction, prevent sticking, resist wear, and enhance surface durability in dry operating conditions. According to DRILUBE, LUBELAS can be applied to components such as O-rings, oil seals, and rubber sheets, and is compatible with various rubber materials like NBR, HNBR, EPDM, CR, NR, UR, FKM, IIR, CSM, SBR, and BR.
In industrial manufacturing, rubber components such as O-rings, gaskets, seals, oil seals, and rubber sheets often operate in environments with friction, repetitive motion, surface contact, or require precise assembly. If the rubber surface is not properly treated, components can experience sticking, rapid wear, difficult assembly, reduced sealing capability, noise generation, or shortened service life. Therefore, LUBELAS DRILUBE is a suitable solution for businesses needing to improve the sliding properties and stability of rubber components in machinery, industrial equipment, and production lines.

1. Key Features of the Product

The strength of LUBELAS DRILUBE lies in its ability to create a lubricating film on rubber surfaces, enabling stable component operation even in dry conditions. This coating helps reduce sliding friction, limit wear, and prevent rubber parts from sticking to each other during use. This is a significant advantage for rubber components frequently subjected to compression, sliding, friction, or repetitive contact with other surfaces.
LUBELAS can be used for various purposes such as improving lubrication, increasing durability, providing antistatic properties, enhancing oil and gasoline resistance, improving heat resistance, and creating a non-glossy black surface depending on application requirements. For certain rubber materials, DRILUBE can apply a primer as a pre-treatment step to increase the adhesion of the LUBELAS film to the material surface.
The product comes in various technical codes such as LM-3, FS-1360, FD-2500, FI-2310, FI-9240, FN-2801, and FN-2802. These series differ in color tone, lubricating components, curing temperature, film thickness, corrosion resistance, and non-stick properties. For example, some series use MoS2, while many others use PTFE for lubrication effectiveness. Film thickness typically ranges from 5–20µm depending on the product series.
A significant advantage of LUBELAS is its ability to treat various types of rubber materials. Instead of being suitable for only a specific group of materials, the product can be applied to many common industrial engineered rubbers such as NBR, HNBR, EPDM, FKM, SBR, and many others. This allows businesses to easily select the appropriate coating solution based on specific components, operating environments, and technical requirements.
Built on DRILUBE's dry lubrication technology, LUBELAS is not just a sliding aid coating but also a surface improvement solution for rubber components. The product is particularly suitable for applications requiring limited use of traditional oil and grease lubricants, reducing dust adhesion, increasing surface cleanliness, and maintaining stable operating performance over long periods.

2. What Industries is the Product Applied to?

LUBELAS DRILUBE – Lubrication Film for Rubber Components is applied in various fields such as:
- Automotive components industry: Used for O-rings, oil seals, gaskets, seals, and other rubber parts requiring stable sliding properties, anti-sticking, and wear resistance.
- Engineered rubber industry: Suitable for businesses manufacturing rubber components that require surface treatment to enhance durability, sliding properties, and assembly ease.
- Precision machinery industry: Applied to rubber components in mechanical assemblies that require friction control and stable motion.
- Industrial equipment industry: Used in machinery, drive units, sealing assemblies, and areas where rubber contacts metal, plastic, or other rubber.
- Electrical and electronics industry: Suitable for small rubber components requiring anti-sticking, surface improvement, and stability during assembly.
- Automation industry: Used for rubber components in motion mechanisms, feeding systems, clamping units, sliding assemblies, or repetitive contact parts.
- O-ring, gasket, seal, oil seal manufacturing industry: Helps improve sliding properties, reduce assembly force, prevent surface sticking, and extend product lifespan.

3. Product Technology and Application Process

LUBELAS DRILUBE is typically used in processes such as:
- Rubber component surface coating process.
- O-ring surface treatment process.
- Oil seal surface treatment process.
- Rubber gasket and seal surface treatment process.
- Rubber sheet sliding property improvement process.
- Anti-sticking process for rubber components.
- Friction reduction process for moving rubber parts.
- Surface treatment process before component assembly.
- Surface property improvement process when changing base materials.
- Matte black surface creation process for rubber components.
The product is used in various locations such as:
- O-ring surfaces.
- Oil seal surfaces.
- Rubber gasket surfaces.
- Rubber seal surfaces.
- Rubber sheet surfaces.
- Sliding rubber components.
- Rubber components in contact with metal.
- Rubber components in contact with plastic.
- Rubber components requiring anti-sticking properties.
- Rubber components requiring friction reduction during assembly.
Regarding coating methods, LUBELAS series on the DRILUBE website are noted to use spray coating. Depending on the product code, curing temperatures can be room temperature, 100℃, 150℃, 100–150℃, or 230℃, with common curing times of approximately 40–60 minutes.

4. Product Structure and Main Components

LUBELAS DRILUBE typically includes key technical elements such as:
- Lubricating film coated on the rubber surface.
- Solid lubricants such as MoS2 or PTFE, depending on the product series.
- The base material is engineered rubber.
- The coated surface has a film thickness of approximately 5–20µm, depending on the product code.
- A primer layer in some cases to increase adhesion.
- Coating color tones such as gray, milky white, green, or black, depending on the series.
- Lubricating capability in dry conditions.
- Anti-sticking capability between rubber components.
- Corrosion resistance, depending on the product series.
- Ability to improve surface properties and increase component durability.
Depending on the intended use, customers can choose LUBELAS based on rubber material type, sliding requirements, friction conditions, anti-sticking requirements, operating temperature, surface color, coating film thickness, and suitable treatment method.

5. Benefits for Manufacturing Businesses

The use of LUBELAS DRILUBE significantly helps businesses improve the operational performance of rubber components. With its ability to reduce friction and increase sliding properties, the product helps prevent motion jamming, difficult assembly, or surface sticking between rubber parts. This is a crucial factor for manufacturers of automotive components, industrial equipment, O-rings, seals, and oil seals.
The product also helps extend the lifespan of rubber components by protecting surfaces from wear during sliding or repetitive contact. When the rubber surface is treated with an appropriate film, components can maintain better stability, reduce the risk of premature failure, and limit component replacement costs.
For assembly processes, LUBELAS helps reduce initial friction force, facilitates easier installation, and minimizes the risk of deformation or scratching of rubber surfaces. This is particularly beneficial for small components, sealing parts, or components requiring high precision during assembly into equipment units.
Furthermore, LUBELAS helps businesses reduce reliance on traditional oil and grease lubricants. The dry lubricating film helps reduce dust adhesion, minimizes contamination risks, and is suitable for applications requiring cleaner, drier, and more stable surfaces during use.
With various product series, LUBELAS allows businesses to choose the appropriate solution based on specific technical requirements, from improving lubrication, anti-sticking, antistatic properties, oil/gasoline resistance, to enhancing heat resistance or creating a non-glossy black surface. This is a significant advantage for businesses needing to control component quality according to specific operating conditions.
LUBELAS DRILUBE – Lubrication Film for Rubber Components is a suitable solution for businesses manufacturing engineered rubber components, O-rings, oil seals, gaskets, seals, automotive components, industrial equipment, and precision machinery. The product helps improve sliding properties, reduce friction, resist wear, prevent sticking, and enhance the stability of rubber components in modern industrial manufacturing environments.