• UNIVERSAL TENSION AND COMPRESSION TESTING MACHINE

UNIVERSAL TENSION AND COMPRESSION TESTING MACHINE

1. Data acquisition speed and controlAGX-V2: Uses an ultra-fast 10 kHz (10,000 samples per second) data sampling rate and an ultra-fast 1 kHz head control. This is achieved through multiple processors and controllers, allowing it to capture even the smallest and most abrupt changes in the sample, such as the precise breaking point of brittle materials. This level of speed is critical for accurately characterizing dynamic material behavior.
2. Accuracy and reliability
AGX-V2: Boasts an extended guaranteed test force accuracy range of 1/2000 for a single force cell (compared to 1/1000 or 1/500 for some others). This means that a single force cell can reliably cover a much wider range of test forces, reducing the need for frequent force cell replacement and calibration. It also ensures simultaneous sampling on all channels (force sensor, extensometer, external input), improving the accuracy and reliability of calculated values ​​such as elastic modulus.
3. Automation and user-friendliness
AGX-V2: Integrates several features to enhance operability and reduce manual tasks:
Multi-Joint Feature: Simplifies clamping changes, allowing quick and easy connection of different types of clamping (tension, compression, bending) without replacing heavy joints.
Smart Controller/Operation Controller: Features a color LCD touchscreen for direct machine operation and setup, often eliminating the need for a separate PC for basic tests.
Voice Operation (XV-Talk™): A unique feature that allows the operator to control the machine with key voice commands (e.g., “Start Test,” “Return”), eliminating the need to press buttons frequently and enhancing safety.

Autotuning Feature: Provides precise strain control, even in noisy or interrupted conditions, where conventional autotuning is difficult.

4. Safety Features
AGX-V2: Prioritizes operator and machine safety with advanced features such as:
Highly impact-resistant, transparent safety cover with interlock functions to prevent testing if the cover is open.
Intelligent Crosshead: Recognizes its position and prevents clamp collisions by providing warnings and automatically stopping movement if the clamps are too close together.
Overload Detection Function: Automatically stops the machine head if the test force exceeds the capacity of the force sensor, reducing the risk of damage.

Self-Diagnostic Function: Continuously monitors the machine status, sensor calibration, power supply and communication, notifying the user of potential problems and assisting in maintenance planning.

5. Frame Stiffness and Straightness
AGX-V2: Features a high-rigidity frame design with a newly designed guide column and support ring that maintain perpendicular alignment to the table surface. This improves measurement repeatability, especially for high-hardness or brittle materials that are sensitive to frame stiffness and straightness.

Category

Electronic parts / Railway / Measuring machinery

CONTACT

Inquiry for the above product

Name*
Company Name*
Country*
Department
Position
Email Address*
Phone Number
Business Category
motive ※
the purpose ※
Information you want to know ※
Time of introduction ※
Other company's products
Contact※
File Attachment
Image files (JPEG, PNG, GIF), PDF files, Compressed files (ZIP, LZH) (Maximum 10MB)
Consent Regarding the Handling of Personal Information ※

NC Network Co., Ltd. complies with laws, regulations, and other standards related to the handling of personal information, and takes the utmost care to properly manage and protect personal information so that users can use our services comfortably and with peace of mind.

We also conduct periodic audits and inspections of our compliance program and personal information protection system and make continuous improvements. We take reasonable preventive and corrective measures against internal and external risks such as unauthorized access, loss, destruction, falsification, and leakage of all personal information. The following outlines how NC Network handles personal information.

Purpose of Use

The personal information you provide will be used by NC Network for the following purposes and will not be used for any other purpose.

  • To ensure smooth commercial transactions conducted through NC Network
  • For distributing email newsletters
  • For surveys regarding usage status and environment, and for preparing statistical materials aimed at improving NC Network services
  • For identity verification during user support

Disclosure of Personal Information to Third Parties

As a general rule, NC Network will not disclose the personal information you provide to third parties. However, exceptions apply in the following cases.

  • When the user has given prior consent for the disclosure of personal information
  • When NC Network determines that it is necessary to protect its rights, property, or services due to actions by the user that violate the Terms of Use or other regulations
  • When there is an imminent danger to someone's life, body, or property and urgent action is required
  • When formal inquiries are received from courts, police, or other public institutions based on applicable laws
  • When disclosure or provision is required under applicable laws and regulations

Disclosure, Correction, and Deletion of Personal Information

In principle, NC Network allows users to view their registered information at any time. These reference screens serve as the procedures for the disclosure, correction, and deletion of personal information. Users may also apply for withdrawal at any time to delete their registered personal information.

Privacy Policy Revisions

To continue protecting users’ personal information, NC Network may revise all or part of this privacy policy without prior notice to users. Any significant changes will be announced on the NC Network website.

Inquiries Regarding Personal Information

For other inquiries regarding personal information, please contact us by email or telephone at the contact information below.

Online Contact

(+84)24-3719-2826 (Support Hours: 9:00–18:00)

Please read and agree to the Terms of Use and Privacy Policy before submitting.
Precautions

Acts such as advertising or promotion using the inquiry form are prohibited by our terms of service. If discovered or reported, your use may be suspended. Please be aware of this in advance.

The questionnaire content and contact information will also be notified to selected exhibitors.

Company Information

LMS TECHNOLOGIES VIETNAM COMPANY LIMITED

Main 3 Products

Mechanical Properties Testing Machines / Hardness tester / Residual Stress Analyzer

Homepage URL

Display URL

Exclusive representative of the world's leading brands in the field of scientific equipment, including SHIMADZU, THERMO FISHER, NETZSCH, INNOVATEST, OCS, DATAPHYSICS,... LMS is committed to bringing w ...

Related Technologies/Services