Melt Index Tester
Plastic melt index testers (Plastometers) are commonly referred to as "melt indexers" and are used in laboratories to measure the melt flow rate (MFR / MFI, unit: g/10 min) and melt volume rate (MVR, unit: cm³/10 min) of thermoplastics (pellets, powders, or fine particles).
These devices are designed to perform flow rate tests in accordance with EN ISO 1133 and ASTM D1238 standards. The testing equipment can be configured with various automatic accessories and options to meet even the most demanding applications.
Gottfert melt index testers, with models featuring automatic load selection, can perform Procedure B of ISO 1133 and ASTM D1238, Procedure C, which corresponds to the "half-height/radius" criterion of ISO 1133 and ASTM D1238, Procedure D for "Flow Rate Ratio (FRR) testing," and tests according to ASTM D3364. Manual Procedure A is also supported.
Additionally, "IV testers" are used to measure intrinsic viscosity (IV) or solvent viscosity (SV) without the use of chemicals. Intrinsic viscosity is a characteristic value that indicates the average molecular weight of PET and PA-based polymers.
CONTACT
Inquiry for the above productCompany Information
Mechanical Properties Testing Machines / Hardness tester / Residual Stress Analyzer
Exclusive representative of the world's leading brands in the field of scientific equipment, including SHIMADZU, THERMO FISHER, NETZSCH, INNOVATEST, OCS, DATAPHYSICS,... LMS is committed to bringing w ...