Technology & Services

FCD ductile iron casting for large-sized hubs and cases of wheel loaders | Heavy-duty component manufacturing capability

FCD ductile iron casting for large-sized hubs and cases of wheel loaders | Heavy-duty component manufacturing capability

Vina Ito has the capability to cast medium to large iron components such as hubs, carriers, cases, and housings, with weights ranging from 50 kg to over 2 tons per piece. Our experience in manufacturing these component groups for construction machinery and mining equipment serves as the basis for the company to evaluate its capability to meet hub and case projects for wheel loaders.

We apply self-hardening alkaline phenolic resin sand mold casting technology, producing ductile iron FCD450–FCD700 and combining it with post-casting machining. Our casting, machining, and quality inspection equipment systems support the production process from raw castings to finished components according to the technical requirements of each product.

Production capacity for large hubs and cases for construction machinery

Hubs are components belonging to the wheel assembly, while cases are used as housings for mechanical assemblies depending on the design. For equipment operating under high loads such as wheel loaders, the selection of materials, casting methods, and machining of mating surfaces must be based on the structure and operating conditions of each component.

Vina Ito has experience in manufacturing the following component groups for construction machinery and mining equipment:

  • Rear hub, front hub, and carrier: Components for mining dump trucks.

  • Case: Components for bulldozers.

  • Housing: Components for articulated dump trucks.

The above products demonstrate our capability to manufacture components for wheel assemblies, drivetrain systems, and mechanical assembly housings for construction machinery and mining equipment.

With our foundry and machining workshop located on the same premises, Vina Ito performs all stages from mold making, melting, magnesium nodularization treatment, iron pouring, cleaning, and finishing of raw castings to machining according to technical drawings.

FCD ductile iron casting technology for high-load components

  • FCD450–FCD700 ductile iron

Vina Ito is capable of producing FCD450–FCD700 ductile iron. Ductile iron features a spheroidal graphite microstructure, making it a suitable material for many mechanical components requiring high strength and toughness.

For wheel loader hubs and cases, the specific iron grade must be selected based on drawings, mechanical property requirements, loading conditions, and applicable technical standards.

  • Self-hardening alkaline phenolic resin sand mold technology

Vina Ito utilizes self-hardening alkaline phenolic resin sand mold casting technology to produce medium to large cast iron components. Molding sand is mixed with binders and catalysts to form molds according to the product shape.

For components with thick-walled structures or complex shapes such as hubs and cases, mold quality, gating and riser system design, material composition, solidification conditions, and the cooling process are critical factors that must be controlled to minimize the risks of shrinkage porosity, cracking, and deformation.

Vina Ito is equipped with two induction furnaces with a capacity of 3 tons each, magnesium nodularization treatment equipment, a sand mixing and reclamation system, and casting cleaning and finishing equipment. The factory also features overhead cranes with lifting capacities of 3–8 tons to support transport and lifting during the production process.

Machining and post-casting quality inspection

In addition to the casting equipment system, Vina Ito is equipped with DMG MORI NHX8000, NHX6300, and Niigata HN100D-II machining centers, an Okuma V100R vertical lathe, and other machining equipment.

For hubs and cases, the post-casting machining stage focuses on finishing surfaces, holes, and mating positions according to technical drawings. The machinability of each component is evaluated based on blank size, weight, structure, and required tolerances.

Quality inspection equipment includes:

  • Material testing: OBLF optical emission spectrometer for composition analysis, universal testing machine for mechanical properties, Brinell hardness tester, and metallographic microscope for microstructure inspection.

  • Defect inspection: Ultrasonic testing equipment for casting defect inspection.

  • Dimensional inspection: 3D coordinate measuring machine (CMM) for measuring the dimensions and geometry of components after machining.

Depending on the material characteristics, structure, and technical requirements of each project, appropriate testing methods are selected to evaluate the quality of the castings and post-machined components.

Capability to supply hubs and cases for wheel loaders

Drawing on our experience in manufacturing hubs, carriers, and cases for construction machinery and mining equipment, Vina Ito can evaluate similar component projects for wheel loader wheel and drivetrain systems.

Our capability to supply is evaluated based on drawings, material grades, dimensions, weight, machining requirements, and specific inspection criteria.

Businesses looking for a partner for FCD ductile iron casting and machining of large hubs, cases, or carriers for wheel loaders can send technical drawings and related requirements for Vina Ito to evaluate our capability and propose a suitable production plan.

■ Vui lòng tải tài liệu PDF để tham khảo thông tin chi tiết hoặc liên hệ Vina Ito để được tư vấn.

Company Information

VINA ITO Co., Ltd.

Industry Classification

Industrial machinery

Main 3 Products

FCD Ductile Iron Component / Drive components / Heavy load components

VINA ITO is a company specializing in ductile iron casting and CNC machining of components for the heavy industry sector, adhering to Japanese standards in Vietnam. The company focuses on manufacturin ...

PICKUP

Technology & Services

CONTACT

Contact

This is the inquiry form for VINA ITO Co., Ltd.. Please enter your inquiry details.

This service is intended for consulting on processing projects and requesting quotes.
Please do not use it for company PR or sales activities.
If we receive complaints about the content sent, we may take measures such as forcibly suspending usage.

Name*Required
Company Name*Required
Department
Position
Email Address*Required
Phone Number*Required
Inquiry Type*Required
Inquiry Content*Required
Attach File

Only files with extensions of images (jpeg, jpg, gif, png, pdf) and compressed files (zip, lzh) are valid. Maximum file size 10MB