Technology & Services

For those experiencing silver streaks during injection molding.

For those experiencing silver streaks during injection molding.
"To those troubled by silver streaks during injection molding"
~Supporting fundamental improvement of gas and moisture troubles through mold maintenance services~
In injection molding, "silver streaks" are a common appearance defect where silver-colored streaky patterns appear on the product surface. This significantly affects the appearance quality of precision plastic parts such as electronic components and connectors, and is one of the frequently occurring problems in mass production sites.
Silver streaks occur due to a complex interplay of multiple factors such as material conditions, molding conditions, and mold structure, so simple condition changes are often insufficient for improvement. Such problems can be fundamentally improved by combining mold maintenance and optimization of molding conditions.
■ What are Silver Streaks?
Silver streaks are a defect phenomenon that appears as silver-colored streaks or linear patterns on the surface of injection molded products. They occur when moisture, gas, or air mixed inside the resin vaporizes during molding and appears on the surface along the resin flow.
They tend to occur particularly under the following conditions:
When using highly hygroscopic resin materials
When resin drying is insufficient
Products with fine features or narrow flow paths
Mold structures where gas tends to accumulate
In micro-molding of connectors and similar parts, even slight amounts of gas or moisture can appear as appearance defects.
■ Main Causes: Material Moisture, Air Entrapment, Insufficient Heating
Silver streak defects are mainly caused by the following factors:
Residual moisture in the material: Due to insufficient drying, moisture inside the resin evaporates when heated, appearing as streaks of bubbles.
Air entrapment: Air is mixed in during injection and appears on the surface along the resin flow.
Insufficient heating (insufficient resin temperature): The resin does not melt sufficiently, and gas and moisture do not diffuse uniformly.
Gas accumulation in the mold: Gas discharge is hindered due to insufficient venting or dirt inside the mold.
Especially in precision parts molding with small molding machines of 100t or less, the effects of even slight gas or moisture can conspicuously appear as appearance defects.
■ Main Solutions: Material Management and Optimization of Molding Conditions
For improving silver streak defects, comprehensive measures involving material management, molding conditions, and mold structure are important.
Sufficient drying of materials: Manage the hygroscopic state of the resin and maintain appropriate drying conditions.
Adjustment of injection speed: Suppress air entrapment and ensure stable resin flow.
Optimization of heating temperature: Set the resin temperature appropriately to stabilize the molten state.
Improved gas venting through mold maintenance: Restore gas discharge function through cleaning and reprocessing of vent grooves, etc.
By combining these measures, recurrence of silver streaks can be prevented.
■ Key Points for Purchasers
When requesting improvement for silver streak defects, sharing the following information will facilitate smoother identification of the cause:
Location of silver streaks (photos, drawings)
Type of resin used and drying conditions
Current molding conditions (temperature, injection speed, etc.)
Mold vent structure and gate position
Product shape (presence of ribs, fine features)
Especially for micro-parts, gas accumulation and flow balance inside the mold significantly affect appearance quality, so optimization at the mold design stage is crucial.
■ Features of SHINKO PRECISION VIETNAM's Mold Maintenance Service
SHINKO PRECISION VIETNAM comprehensively analyzes material conditions, gas generation, and flow conditions that cause silver streak defects, and provides mold maintenance services aimed at stabilizing appearance quality.
We propose improvements from three perspectives—material management, molding conditions, and mold structure—especially for silver streak defects that tend to occur in the molding of fine appearance parts such as electronic components and connectors. We also support molds for precision injection molding of 100t or less, helping achieve stable molding quality through improvements in venting structures and internal mold maintenance.
Furthermore, beyond mere repair services, we offer maintenance proposals focused on extending mold lifespan and mold design consulting, providing improvements that include recurrence prevention.

Company Information

SHINKO PRECISION VIETNAM CO., LTD

Industry Classification

Telecommunication equipment / Electronic parts / Electrical component for transportation equipment

Main 3 Products

Plastic molds / Plastic mold components / Mold design

Homepage URL

Display URL

Established in January 2024 Headquarters: Shinko Precision Mold Manufacturing Co., Ltd. (Osaka)

PICKUP

Technology & Services

CONTACT

Contact

This is the inquiry form for SHINKO PRECISION VIETNAM CO., LTD. Please enter your inquiry details.

This service is intended for consulting on processing projects and requesting quotes.
Please do not use it for company PR or sales activities.
If we receive complaints about the content sent, we may take measures such as forcibly suspending usage.

Name*Required
Company Name*Required
Department
Position
Email Address*Required
Phone Number*Required
Inquiry Type*Required
Inquiry Content*Required
Attach File

Only files with extensions of images (jpeg, jpg, gif, png, pdf) and compressed files (zip, lzh) are valid. Maximum file size 10MB