SERVICES
Technology & Services
Summary: Put an End to “Cloudy Oil is Normal” Oil cloudiness is a sign that contamination is not being prevented. Maintaining performance without relying on replacement is the new standard. With Miracle Boy, you can protect both oil cleanliness and your equipment.
Equipment Problems Caused by Moisture and Emulsion Contamination, and their CountermeasuresCan “Just a Little Water” Damage Equipment?
Oil is supposed to repel water, yet many operators report:
“Oil looks milky and foamy.”
“Valves and cylinders malfunction.”
“Pumps seize up and the equipment stops.”
Most of these issues are caused by invisible levels of moisture or emulsified water inside the oil.
Mechanism of Moisture and Emulsion Contamination
Cause | Description
Humidity in air | Condensation inside tank breathing, water droplets entering
Coolant leakage | Pipe deterioration or heat exchanger infiltration
High temperature & agitation | Small amounts of water emulsify (milky state) and become hard to remove
→ Once water enters, it mixes with oil, leading to “invisible degradation” that progresses beyond visual detection.
Main Problems Caused by Moisture and Emulsion
Problem | Description | Result
Oil film rupture | Decreased lubricating performance | Pump seizure, accelerated wear
Valve malfunction | Viscosity change due to emulsion | Control failure, time lag occurrence
Rust & corrosion | Metal reaction with moisture | Internal damage, increased maintenance cost
Accelerated oxidation | Chemical reaction due to water and heat | Greatly shortened oil lifespan
Principle of Countermeasure: Not just Prevent water but Remove it if it enters
Completely blocking water entry is unrealistic.
Therefore, the key is to remove any entered water immediately and maintain oil performance.
Fundamental Solution: Water Removal and Purification by “Miracle Boy”
What is Miracle Boy?
A high-performance adsorptive oil purification system that removes moisture, emulsion, fine particles, and oxidation sludge — all at once.
Water & Emulsion Removal Performance
Function | Technology | Effect
Water removal | Adsorptive filter absorbs down to ppm levels | Prevents whitening, corrosion, stabilizes viscosity
Emulsion removal | Unique adsorption layers absorb even hard-to-separate emulsified water | Ensures stable control equipment operation
Particle removal | Deep filtration (focused on 3 µm) | Prevents clogging and wear
→ Many real-world cases report: “Cloudy oil becomes clear again!”
Case Study (Automotive Parts Factory)
Measurement Item | Before | After
Moisture content | 1,100 ppm | 68 ppm
Oil appearance | Milky, foamy | Clear and colorless
Valve malfunctions | 5 cases/month | 0 cases in 6 months
Oil replacement | Once per year | Over 3 years continuous use without replacement
Summary: It's not over when water gets in
The key is not to prevent water entry completely, but to remove it immediately.
With Miracle Boy, you can eliminate invisible moisture and emulsions, keeping oil performance stable for the long term.
Ideal for Sites Facing These Problems
Oil appearance deteriorates due to cloudiness/foaming.
Recurring control malfunctions with no clear cause
Equipment must run continuously without shutdown
Existing water-removal filters are ineffective
Toward “Water-Free” Equipment Operation
With Miracle Boy, dry, clear oil becomes the new normal.
Oil is supposed to repel water, yet many operators report:
“Oil looks milky and foamy.”
“Valves and cylinders malfunction.”
“Pumps seize up and the equipment stops.”
Most of these issues are caused by invisible levels of moisture or emulsified water inside the oil.
Mechanism of Moisture and Emulsion Contamination
Cause | Description
Humidity in air | Condensation inside tank breathing, water droplets entering
Coolant leakage | Pipe deterioration or heat exchanger infiltration
High temperature & agitation | Small amounts of water emulsify (milky state) and become hard to remove
→ Once water enters, it mixes with oil, leading to “invisible degradation” that progresses beyond visual detection.
Main Problems Caused by Moisture and Emulsion
Problem | Description | Result
Oil film rupture | Decreased lubricating performance | Pump seizure, accelerated wear
Valve malfunction | Viscosity change due to emulsion | Control failure, time lag occurrence
Rust & corrosion | Metal reaction with moisture | Internal damage, increased maintenance cost
Accelerated oxidation | Chemical reaction due to water and heat | Greatly shortened oil lifespan
Principle of Countermeasure: Not just Prevent water but Remove it if it enters
Completely blocking water entry is unrealistic.
Therefore, the key is to remove any entered water immediately and maintain oil performance.
Fundamental Solution: Water Removal and Purification by “Miracle Boy”
What is Miracle Boy?
A high-performance adsorptive oil purification system that removes moisture, emulsion, fine particles, and oxidation sludge — all at once.
Water & Emulsion Removal Performance
Function | Technology | Effect
Water removal | Adsorptive filter absorbs down to ppm levels | Prevents whitening, corrosion, stabilizes viscosity
Emulsion removal | Unique adsorption layers absorb even hard-to-separate emulsified water | Ensures stable control equipment operation
Particle removal | Deep filtration (focused on 3 µm) | Prevents clogging and wear
→ Many real-world cases report: “Cloudy oil becomes clear again!”
Case Study (Automotive Parts Factory)
Measurement Item | Before | After
Moisture content | 1,100 ppm | 68 ppm
Oil appearance | Milky, foamy | Clear and colorless
Valve malfunctions | 5 cases/month | 0 cases in 6 months
Oil replacement | Once per year | Over 3 years continuous use without replacement
Summary: It's not over when water gets in
The key is not to prevent water entry completely, but to remove it immediately.
With Miracle Boy, you can eliminate invisible moisture and emulsions, keeping oil performance stable for the long term.
Ideal for Sites Facing These Problems
Oil appearance deteriorates due to cloudiness/foaming.
Recurring control malfunctions with no clear cause
Equipment must run continuously without shutdown
Existing water-removal filters are ineffective
Toward “Water-Free” Equipment Operation
With Miracle Boy, dry, clear oil becomes the new normal.
Company Information
Industry Classification
Machine tools / Industrial machinery
Main 3 Products
High-performance oil filtration system for lubricating oil and hydraulic oil / Coolant sludge removal device / Various types of gas alarm detectors
Phone Number
Homepage URL
We provide sales and services for environmental protection products for industrial sites, and products that ensure workplace safety and comfort.
PICKUP
Technology & ServicesCONTACT
Contact