SERVICES
Technology & Services
FCS-500 – Oil-impregnated plain bearing material combining the smooth sliding characteristics of bronze and the wear resistance of iron
What is FCS-500?
FCS-500 is an Fe–Cu based oil-impregnated sliding bearing material. The distinctive feature of FCS-500 lies in its powder particle structure. The iron content accounts for a large proportion, which helps enhance wear resistance. Meanwhile, the bronze component present on the sliding surface helps reduce friction and improve sliding performance.
Key features of FCS-500 sintered material?
Iron content enhances wear resistance
FCS-500 has a relatively high proportion of iron content, which is effective in enhancing the material's wear resistance. This makes the shaft bushing more suitable for high-load motors, where the bearing surface frequently contacts the shaft and must maintain stable dimensions over a long period.
Bronze content helps reduce friction and noise
Although iron content accounts for a large proportion, the sliding surface of FCS-500 contains bronze. As a result, the material can leverage the low friction properties of bronze to:
- Reduce friction between the shaft and the bearing
- Support stable sliding movement
- Limit noise generated during operation
- Improve motor smoothness
This is a significant difference compared to conventional iron-based oil-impregnated sliding bearings.
Fine powder particles extend oil retention time
Another notable feature of FCS-500 is the use of small-sized raw material powder particles. When the powder particle size is reduced, the porous structure of the material can retain impregnated oil for a longer period. This contributes to maintaining lubrication between the shaft and the bearing during operation. According to Peace-Lon's documentation, extending the oil retention time can contribute to prolonging the lifespan of the sliding bearing. This mechanism can be understood as follows:
- Lubricating oil is retained in the pores of the sintered material.
- During motor operation, oil is gradually supplied to the inner diameter surface of the bearing.
- The oil helps form a lubricating film between the shaft and the bearing.
- Longer oil retention helps prevent the sliding surface from running out of oil too soon.
However, actual lifespan also depends on load, sliding speed, temperature, shaft material, and operating conditions.
Load parameters and usage range
| Item | Value |
| Main composition | Fe–Cu |
| Permissible PV | 180 MPa·m/min |
| Maximum surface pressure Pmax | 3.6 MPa |
| Maximum sliding speed Vmax | 100 m/min |
| Density | 6.2–7.1 g/cm³ |
PV is the product of:
- P: surface pressure
- V: sliding speed
When selecting sliding bearing materials, one should not only compare maximum load or maximum speed in isolation. Actual operating conditions must fall within the recommended range shown on the material's P–V diagram. The Pmax and Vmax values also do not imply that operation is simultaneously possible at both extreme conditions.
FCS-500 Material Composition
| Component | Content |
| Fe | Balance |
| Cu | 15–25 wt% |
| Sn | ≤ 5 wt% |
| P | — |
| Zn | — |
| C | — |
| Other components | ≤ 1 wt% |
What applications is FCS-500 suitable for?
Thanks to its ability to reduce friction, limit noise, and maintain durability during operation, FCS-500 is suitable for various types of sliding bearings used in fan motors, high-load motors, OA equipment, home appliances, power tools, automotive components, and precision equipment. In particular, FCS-500 is a suitable choice for products that require both smooth operation and wear resistance, while also needing to optimize material costs through VA/VE proposals.
When should FCS-500 be considered?
FCS-500 can be considered when:
- Iron-based sliding bearings do not meet smoothness requirements
- Motors generate noise at the shaft bushing location
- Improved wear resistance is needed
- A material suitable for high-load motors is required
- There is a desire to extend the oil retention time in the bearing
- A balance between sliding properties and material strength is needed
- The current copper-based material needs to be re-evaluated regarding its composition
Material replacement still needs to be assessed based on drawings, load, speed, PV value, shaft material, and required lifespan.
How does FCS-500 differ from conventional copper-based and iron-based materials?
| Criterion | FCS-500 | Conventional copper-based material | Conventional iron-based material |
| Main composition | Fe–Cu | Cu–Sn | Fe |
| Characteristic structure | Iron particle surface coated with bronze | Bronze matrix | Iron matrix |
| Smoothness | Good due to bronze content on the sliding surface | Good | Needs to be evaluated based on material |
| Wear resistance | Improved due to high iron content | Depends on material type | Advantages in iron content |
| Oil retention capability | Fine powder particles help extend oil retention time | Depends on material structure | Depends on material structure |
| Applications in documentation | Fan motors, high-load motors | Not specified | Not specified |
This table only shows characteristic guidelines based on material structure. Actual performance needs to be confirmed by usage conditions and testing.
Technical support from Peace-Lon Vietnam
Peace-Lon Vietnam supports the selection of oil-impregnated sliding bearing materials based on the actual operating conditions of each product. When interested in FCS-500 sintered material, customers are kindly requested to provide:
- Bushing drawing
- Load
- Rotational speed or sliding speed
- PV value
- Shaft material and hardness
- Shaft surface roughness
- Operating temperature
- Type of impregnated oil
- Smoothness requirements
- Target lifespan
Based on this information, Peace-Lon Vietnam can assist in material selection, trial production, evaluation of sliding performance, and development of mass production plans. For motors requiring a balance between smoothness, wear resistance, and load capacity, FCS-500 is a worthy option for oil-impregnated sliding bearing material.
Company Information
Electronic parts
Oil-impregnated sintered bearing / Gears, pulleys, and other mechanical parts / Powder Metallurgy
Peace-Lon is a brand of Heiwa Sangyo Co., Ltd., a Japanese company that has manufactured self-lubricating oil-impregnated plain bearings and sintered mechanical parts utilizing powder metallurgy and s ...
CONTACT
Contact