• Circular vibratory feeder

Circular vibratory feeder

A vibratory feeder is a device that uses vibration to feed material through a process or a machine while controlling the flow rate and is designed according to Newton's first law. This is why they operate with great stability and efficiency.
Operating Principle of a Vibratory Feeder
The general design of a vibratory feeder includes a drive unit that generates vibratory motion and a deep channel, or trough, containing bulk material. The drive unit causes oscillation with both horizontal and vertical force components, similar to the operation of a vibratory parts feeder. The vibration causes linear motion, provided that the oscillation is sinusoidal and the force components are in phase. In addition to the drive unit and trough, the vibratory feeder consists of the following components:

Inlet end: This is the part of the trough located at the most upstream end where material is fed in.
Discharge end: Opposite the inlet end is the discharge end, located at the most downstream part of the trough. This is where material is discharged from the device.
Eccentric weight: This is a weight attached to a shaft or flywheel with a slight offset from the axis of rotation. The rotation of the shaft creates an unbalanced moment, generating oscillation.
Reaction springs: These are the primary springs in the vibratory system that continuously store and release energy during operation.
Isolation springs: These springs support the feeder while protecting the supporting structure from generated vibrations.
Tuning springs: These springs are used to tune the natural frequency of the feeder. This is done by adding or removing springs or by changing the spring rate. Other feeder designs adjust the frequency by adding or removing weights.
Dynamic balancer: Balanced vibratory feeders use a dynamic balancer to reduce dynamic forces transmitted to the supporting structure. This is achieved by reacting to the reversing forces of the drive unit.
Liner: Material added to cover the surface of the trough design to resist wear, heat or cold, reduce noise and friction, or prevent material buildup.
Screen: An additional component used to separate fine particles from coarser materials.
Grizzly: This is a heavy-duty screen consisting of bars, rails, or tubes running in the direction of material flow. This is used to scalp coarser materials.

Category

Jigs

CONTACT

Inquiry for the above product

Name*
Company Name*
Country*
Department
Position
Email Address*
Phone Number
Business Category
motive ※
the purpose ※
Information you want to know ※
Time of introduction ※
Other company's products
Contact※
File Attachment
Image files (JPEG, PNG, GIF), PDF files, Compressed files (ZIP, LZH) (Maximum 10MB)
Consent Regarding the Handling of Personal Information ※

NC Network Co., Ltd. complies with laws, regulations, and other standards related to the handling of personal information, and takes the utmost care to properly manage and protect personal information so that users can use our services comfortably and with peace of mind.

We also conduct periodic audits and inspections of our compliance program and personal information protection system and make continuous improvements. We take reasonable preventive and corrective measures against internal and external risks such as unauthorized access, loss, destruction, falsification, and leakage of all personal information. The following outlines how NC Network handles personal information.

Purpose of Use

The personal information you provide will be used by NC Network for the following purposes and will not be used for any other purpose.

  • To ensure smooth commercial transactions conducted through NC Network
  • For distributing email newsletters
  • For surveys regarding usage status and environment, and for preparing statistical materials aimed at improving NC Network services
  • For identity verification during user support

Disclosure of Personal Information to Third Parties

As a general rule, NC Network will not disclose the personal information you provide to third parties. However, exceptions apply in the following cases.

  • When the user has given prior consent for the disclosure of personal information
  • When NC Network determines that it is necessary to protect its rights, property, or services due to actions by the user that violate the Terms of Use or other regulations
  • When there is an imminent danger to someone's life, body, or property and urgent action is required
  • When formal inquiries are received from courts, police, or other public institutions based on applicable laws
  • When disclosure or provision is required under applicable laws and regulations

Disclosure, Correction, and Deletion of Personal Information

In principle, NC Network allows users to view their registered information at any time. These reference screens serve as the procedures for the disclosure, correction, and deletion of personal information. Users may also apply for withdrawal at any time to delete their registered personal information.

Privacy Policy Revisions

To continue protecting users’ personal information, NC Network may revise all or part of this privacy policy without prior notice to users. Any significant changes will be announced on the NC Network website.

Inquiries Regarding Personal Information

For other inquiries regarding personal information, please contact us by email or telephone at the contact information below.

Online Contact

(+84)24-3719-2826 (Support Hours: 9:00–18:00)

Please read and agree to the Terms of Use and Privacy Policy before submitting.
Precautions

Acts such as advertising or promotion using the inquiry form are prohibited by our terms of service. If discovered or reported, your use may be suspended. Please be aware of this in advance.

The questionnaire content and contact information will also be notified to selected exhibitors.

Company Information

TCI Industrial Joint Stock Company

Industry Classification

Jigs and tools / Machine tools / Industrial machinery

Main 3 Products

Design and Manufacturing of Automation System Solutions - Smart Factory - AGV - Smart Factory / Machine parts and fixtures / Automated material feeding solution

Homepage URL

Display URL

TCI Industrial Joint Stock Company (TCI) was established in 2006, pioneering in the supporting industries sector, serving foreign direct investment (FDI) companies in Vietnam. With the business motto ...

Related Technologies/Services