Technology & Services

For those experiencing voids in injection molding

For those experiencing voids in injection molding
To those troubled by voids during injection molding
– Fundamentally improving gas entrapment and insufficient pressure with mold maintenance services –
"Voids" (cavities) in injection molding are problems that occur as internal defects when air or gas remains inside the resin and solidifies. Even if they are difficult to see externally, they lead to serious quality issues such as reduced strength, cracks, and dimensional instability, thus requiring prompt improvement in mass production environments.
■ What are Voids?
Voids are internal cavities that solidify when air or volatile gases are entrapped during resin flow during injection, without being properly discharged. Primary causes include insufficient venting, incomplete filling due to insufficient holding pressure, and shrinkage differences caused by uneven cooling. As they are internal defects, they are difficult to detect by visual inspection and represent a high risk to product functionality.
■ Applicable Parts and Applications
Voids are frequently observed in electronic component housings, connectors, mechanical parts, and thick-walled block components. Gas stagnation is particularly prone to occur in thick resin sections and spaces enclosed by ribs, and can frequently happen even with molding machines under 100 tons.
■ Improvement Benefits and Considerations
By improving voids, the following effects can be obtained:
・Improved product strength and reliability
・Improved yield by reducing internal defects
・Stabilization of molding conditions
・Enhanced long-term product durability
On the other hand, simply increasing holding pressure can lead to resin backflow and flash, necessitating a comprehensive review of mold structure, cooling, and venting.
■ Measures to Enhance Processing Precision
For void countermeasures, mold maintenance focusing on resin flow and gas discharge is effective.
・Introduction of vacuum molding: Pre-evacuates air from the cavity to prevent gas entrapment.
・Improvement of vent (degassing) structure: Efficiently discharges stagnant gas, improving pressure and weldability.
・Optimization of holding pressure conditions: Ensures internal density with appropriate time and pressure to compensate for shrinkage.
・Uniformization of mold cooling: Eliminates temperature unevenness and reduces shrinkage differences through the addition and cleaning of cooling lines.
In precision molds, blockages and wear in cooling lines are closely related to void generation, making regular mold maintenance indispensable.
■ Key Points for Purchasers to Consider
When requesting void improvement, sharing the following information enables more precise proposals:
・Cross-sectional information and estimated depth of void occurrence locations
・Shape information such as product wall thickness distribution and rib structures
・Current holding pressure and cooling conditions
・Gas generation characteristics and drying state of the resin used
・Mold venting structure and cooling line layout
Especially for thick-walled parts, uneven cooling is a major cause of void generation, so mold-side improvements show significant effects.
■ Features of SHINKO PRECISION VIETNAM's Mold Maintenance Service
At SHINKO PRECISION VIETNAM, we comprehensively analyze the three major causes of void generation – "gas entrapment, insufficient holding pressure, and uneven cooling" – and implement countermeasures with a view to preventing recurrence.
・Technical expertise specializing in precision molds under 100 tons
・Proposals for improving venting and cooling designs based on extending mold lifespan
・Supply system for high-precision parts through a collaborative network in Japan, China, Taiwan, and Vietnam
・High-precision mold component processing at overseas partner factories (Japanese quality × Vietnamese cost)
・Mold design consulting, including flow analysis and cooling analysis
Voids are not resolved, internal defects are not reduced, and adjusting molding conditions alone has its limits...
Such problems can be significantly improved through mold maintenance and design optimization.
If you share the phenomena and mold specifications, we will propose the optimal improvement plan.

Company Information

SHINKO PRECISION VIETNAM CO., LTD

Industry Classification

Telecommunication equipment / Electronic parts / Electrical component for transportation equipment

Main 3 Products

Plastic molds / Plastic mold components / Mold design

Homepage URL

Display URL

Established in January 2024 Headquarters: Shinko Precision Mold Manufacturing Co., Ltd. (Osaka)

PICKUP

Technology & Services

CONTACT

Contact

This is the inquiry form for SHINKO PRECISION VIETNAM CO., LTD. Please enter your inquiry details.

This service is intended for consulting on processing projects and requesting quotes.
Please do not use it for company PR or sales activities.
If we receive complaints about the content sent, we may take measures such as forcibly suspending usage.

Name*Required
Company Name*Required
Department
Position
Email Address*Required
Phone Number*Required
Inquiry Type*Required
Inquiry Content*Required
Attach File

Only files with extensions of images (jpeg, jpg, gif, png, pdf) and compressed files (zip, lzh) are valid. Maximum file size 10MB